超声波焊接结构设计.ppt
《超声波焊接结构设计.ppt》由会员分享,可在线阅读,更多相关《超声波焊接结构设计.ppt(46页珍藏版)》请在三一办公上搜索。
1、焊接结构,1.超声焊接结构,焊接筋的角度,120,90,60,45,超声焊接结构,基本型,W,W64,W4,W8,Basic Energy Director,超声焊接结构,阶梯型,Step Joint,超声焊接结构,阶梯型,Before After,Chisel energydirector 450.015 to 0.019”tall(0.4 to 0.5mm),0.060”(1.50 mm),0.010”to 0.025”(0.25 to 0.64mm),Chisel Edge,超声焊接结构,阶梯型,Step Joint,超声焊接结构,阶梯型,0.40,0.17,0.03,0.20,(0.3
2、0),Step Joint,超声焊接结构,阶梯型,0.130.29 75 m0.300.44115 m0.45以上150 m,焊接筋高,火花纹凹,火花纹,Energy Director with Opposing Textured Surface,超声焊接结构,阶梯型,齿型,齿型高度约焊接筋的60%,Continuous Criss-CrossEnergy Director,超声焊接结构,榫槽型,3.0,1.5,0.6,2.0,0.7,(0.7),角度 3 5,Tongue&Groove,超声焊接结构,剪切型,Shear Joint,超声焊接结构,剪切型,Shear Joint,超声焊接结构,
3、剪切型,0.1,0.5,0.25,0.1,0.25,0.5,Shear Joint,超声铆接结构,基本型,Before After,D=Stud diameter,2 D,0.5 D,1.6 D,Standard Profile,D,D/2RAD,D,D2,超声铆接结构,低矮型,Before After,D=Stud diameter,Horn,0.6 D,1.5 D,0.25 D,Low Profile Stake,D,0.75D,D/2,D2,超声铆接结构,半圆型铆接,Before After,D=Stud diameter,2.1 D,0.5 D,D,D1-5,2 D,0.5 D,Dom
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 超声波 焊接 结构设计
链接地址:https://www.31ppt.com/p-4947711.html