数控机床液压系统毕业论文.docx
《数控机床液压系统毕业论文.docx》由会员分享,可在线阅读,更多相关《数控机床液压系统毕业论文.docx(34页珍藏版)》请在三一办公上搜索。
1、数控机床液压系统毕业论文数控机床液压系统毕业论文 数控机床液压系统毕业论文 题目 I :数控机床液压系统设计 数控机床液压系统毕业论文 摘 要 本论文针对目前国内外数控车床的现状、发展动态和发展方向及其在现代工业中的重要作用,运用液压元件的基本理论,对其主关键结构液压系统箱进行了原理分析和优化设。根据设计的实际需要,对车床液压系统开展研究,并对液压系统的结构元件和液压控制系统的结构进行了优化设计。并介绍了一种在三爪卡盘上加装摆动式液压缸和平面螺旋机构的螺旋摆动式液压缸增力机构的结构。叙述了主要的设计步骤和参数的确定。 关键词:数控车床 液压油泵 液压油缸 液压控制阀 三爪卡盘 性能分析 参数
2、优化设计 II Abstract The present paper in view of the present domestic and foreign numerical control lathe present situation, the development tendency and the development direction and in the modern industry vital role, the utilization hydraulic unit basic theory, has carried on the static analysis and
3、the optimized design to its important structure lathe bed, then achieved the instruction designs and enhances the numerical control lathe technical performance the goal. According to the design actual need, the method of hydraulics systems used in the actual project the related theory and the realiz
4、ation principle has carried on the elaboration, and has carried on the lathe bed champing and drive module design as well as the optimized design. The research process mainly divides into hydraulic system analysis and hydraulic control of the optimization designs, obtained the lathe bed static stres
5、s and the strain, and has carried on the optimized design to the lathe bed structure, has carried on a more scientific appraisal to the product. Key word:Numerical control lathe ;Hydraulic pumps ;Hydraulic cylinders ;control valves;performance analysis ;Optimized design II 目 录 摘 要 I Abstract II 第一章
6、概 论 1 1.1 液压技术的历史发展 1 1.2 国内数控车床的现状和发展前景 1 1.3研究的对象和研究的方法 2 第二章 液压系统的组成 3 2.1液压系统组件的设计步骤 3 2.2 技术参数确定 3 2.3主传动系统方案的确定 4 2.4液压系统结构设计 4 2.5拟定液压传动系统图 5 第三章 液压站的设计 8 3.1液压缸的参数及设计 8 3.1.1液压缸的分类 8 3.1.2液压缸的主要参数 8 3.1.3 液压缸的设计和计算 10 3.2 液压缸主要零件的材料和技术要求 10 3.2.1 缸体 10 3.2.2 活塞 10 3.2.3活塞杆 11 3.2.4活塞杆直径的计算 1
7、1 3.3 液压泵 12 3.3.1液压泵概述 12 3.3.2液压泵的安装方式 12 3.3.3液压泵的选择 12 3.3.4电动机与液压泵的连接方式 13 3.4 液压油箱 13 3.4.1液压油箱的作用 13 3.4.2液压油箱的外形尺寸 14 3.4.3液压油箱的结构设计 14 3.5集成化设计 15 3.6化的工作要求 15 第四章 三爪卡盘的设计 16 4.1夹具的特点 16 4.2夹具的基本结构和原理 19 4.3三爪卡盘螺旋摆动式液压缸增力机构的结构和原理 20 4.4主要参数确定与结构计算 21 4.5夹具在安装和操作时应注意的事项 错误!未定义书签。 4.6误差分析 错误!
8、未定义书签。 第五章 液压系统性能验算及维护 错误!未定义书签。 5.1性能验算 错误!未定义书签。 5.2系统维护 22 小结体会 23 致谢 24 参考文献 25 毕业设计 第一章 概 论 1.1 液压技术的历史发展 液压传动相对于机械传动来说是一门新技术,但从XX年巴斯卡提出静压传递远离,XX年英国的约瑟夫布拉默利用这一原理在英国制成了世界上第一台水压机,使液压技术开始进入工程领域算起,已有两三百年的历史了。到了20世纪XX年代才较普遍地用于机械、机床及工程领域。在第二次世界大战期间,由于军事工业迫切需要响应迅速、精度高、功率大的液压传动系统和伺服机构,以装备各种飞机、坦克、大炮和军舰,
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 数控机床 液压 系统 毕业论文
![提示](https://www.31ppt.com/images/bang_tan.gif)
链接地址:https://www.31ppt.com/p-3560343.html