UG POST 中英文单词大意.doc

Machine Tool 机床参数Display Machine Tool 机床结构简图Default 默认值Restore 恢复值Program & Tool Path 程序和刀轨参数1. program 子参数页（定义程序起始.操作起始. 刀轨事件.操作结束.程序处的结构和特定输出）2. G Codes 子参数页(定义后处理中相应事件的G代码数字)3. M Codes子参数页(定义后处理中相应事件的M代码数字)4. Word Summary子参数页(集合显示后处理中乃至的字地址格式-头码.数据类型.正负号.小数位等)5. Word 字地址6. Leader/Code 头码7. Data Type 数据类型8. Plus +9. Lead Zero 头零10. Integer 整数位11. Decimal 小数点是否输出12. Fraction 小数位13. Trail Zero 尾零14. Word Sequencing 子参数页 （同行中字母输出顺序）15. Custom Command 子参数页 （建立和编辑用户化命令）16. Linked Posts子参数页（用于管理其他后处理链接到这个后处理）.program start sequence程序开始.operation start sequence 操作开始1. start of path2. from move3. first toll4. auto tool change5. manual tool change 6. initial move7. first move8. approach move9. engage move10. first cut11. start of pass12. cutcom move13. lead in move14. first linear move. Tool Path 刀轨1. machine control2. motion linear move circular move 3. rapid move4. lathe thread5. canned cycles 6. cycle start7. rapid-to 1.r 2.none 3.rapis traverse & r 4.rapid8.retract-to1.none 2.k 3.G98/G99 4.rapid spindle 5.cycle off then rapid spindle待添加的隐藏文字内容19.canned cycle1.cycle off 2.drill 3.drill dwell 4.drill deep 5.drill break chip 6.tap 7.bore 8.bore drag 9.bore no drag 10.bore dwell 11.bore manual (12.bore back 标准背膛 mom_cycle_bore_back_move (13.bore manual dwell 标准膛，停留，手工退刀 .operation end sequence 操作结尾1. mill and lathe铣和车模式1.retract move 退刀运动2.return move 输出2. wire EDM 线切割模式lead out move 切割线引出动作End of move执行3. mill lathe and wire EDM 铣.车和线切割模式 gohome move 回零点End of path 执行.progarm end sequence 程序结尾.post builder 交互操作